Query：
学者姓名：赵立波
Refining：
Year
Type
Indexed by
Source
Complex
Former Name
Co-Author
Language
Clean All
Abstract ：
A micromachined resonator immersed in liquid provides valuable resonance parameters for determining the fluidic parameters. However, the liquid operating environment poses a challenge to maintaining a fine sensing performance, particularly through electrical characterization. This paper presents a piezoelectric micromachined cantilever with a stepped shape for liquid monitoring purposes. Multiple modes of the proposed cantilever are available with full electrical characterization for realizing self-actuated and self-sensing capabilities. The focus is on higher flexural resonances, which nonconventionally feature two-dimensional vibration modes. Modal analyses are conducted for the developed cantilever under flexural vibrations at different orders. Modeling explains not only the basic length-dominant mode but also higher modes that simultaneously depend on the length and width of the cantilever. This study determines that the analytical predictions for resonant frequency in liquid media exhibit good agreement with the experimental results. Furthermore, the experiments on cantilever resonators are performed in various test liquids, demonstrating that higher-order flexural modes allow for the decoupled measurements of density and viscosity. The measurement differences achieve 0.39% in density and 3.50% in viscosity, and the frequency instability is below 0.05 parts per thousand. On the basis of these results, design guidelines for piezoelectric higher-mode resonators are proposed for liquid sensing.
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Huang, Linya , Li, Wei , Luo, Guoxi et al. Piezoelectric-AlN resonators at two-dimensional flexural modes for the density and viscosity decoupled determination of liquids [J]. | MICROSYSTEMS & NANOENGINEERING , 2022 , 8 (1) . |
| MLA | Huang, Linya et al. "Piezoelectric-AlN resonators at two-dimensional flexural modes for the density and viscosity decoupled determination of liquids" . | MICROSYSTEMS & NANOENGINEERING 8 . 1 (2022) . |
| APA | Huang, Linya , Li, Wei , Luo, Guoxi , Lu, Dejiang , Zhao, Libo , Yang, Ping et al. Piezoelectric-AlN resonators at two-dimensional flexural modes for the density and viscosity decoupled determination of liquids . | MICROSYSTEMS & NANOENGINEERING , 2022 , 8 (1) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Thin-Film Thermocouples (TFTCs) are characterized by their high spatial resolutions, low cost, high efficiency and low interference on the air flow. However, the thermal stability of TFTCs should be further improved for application since their accuracy is influenced by joule heat and temperature time drift. In this paper, 3D molecular dynamics and finite element analysis are used for structural design. The effects of RF magnetron sputtering power and gas flow rate on conductivity and temperature time drift rate (DT) of high thermal stability tungsten-rhenium (95% W/5% Re vs. 74% W/26% Re) TFTCs were analyzed. According to the experimental results, the average Seebeck coefficient reached 31.1 mu V/degrees C at 900 degrees C temperature difference (hot junction 1040 degrees C) with a repeatability error at +/- 1.37% in 33 h. The conductivity is 17.1 S/m, which is approximately 15.2 times larger than the compared tungsten-rhenium sample we presented, and the DT is 0.92 degrees C/h (1040 degrees C for 5 h), which is 9.5% of the old type we presented and 4.5% of compared ITO sample. The lumped capacity method test shows that the response time is 11.5 ms at 300 degrees C. This indicated an important significance in real-time temperature measurement for narrow spaces, such as the aero-engine combustion chamber.
Keyword ：
sensor stability thermoelectricity
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhang, Zhongkai , Tian, Bian , Cheng, Gong et al. Influences of RF Magnetron Sputtering Power and Gas Flow Rate on a High Conductivity and Low Drift Rate of Tungsten-Rhenium Thin-Film Thermocouples [J]. | NANOMATERIALS , 2022 , 12 (7) . |
| MLA | Zhang, Zhongkai et al. "Influences of RF Magnetron Sputtering Power and Gas Flow Rate on a High Conductivity and Low Drift Rate of Tungsten-Rhenium Thin-Film Thermocouples" . | NANOMATERIALS 12 . 7 (2022) . |
| APA | Zhang, Zhongkai , Tian, Bian , Cheng, Gong , Liu, Zhaojun , Liu, Jiangjiang , Zhang, Bingfei et al. Influences of RF Magnetron Sputtering Power and Gas Flow Rate on a High Conductivity and Low Drift Rate of Tungsten-Rhenium Thin-Film Thermocouples . | NANOMATERIALS , 2022 , 12 (7) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
To convert as much vibration energy as possible into electrical energy, the design of a high-performance piezoelectric vibration energy harvester (PVEH) has been studied widely in recent years. To overcome the low energy utilization of a traditional piezoelectric cantilever by inhomogeneous strain, a uniform stress distribution of bimorph by an ARC mechanical stopper structure has been designed for maximum piezoelectric vibration energy harvesting. Deflection equations and their simulation at the first-order modal of two classic bimorph cantilever beam models, with transverse tip force and with equal curvature, are derived based on the Euler-Bernoulli beam assumption. Piezoelectric energy from a beam model with equal curvature is four times that of a cantilever beam model with transverse tip force at the theoretical level. The nonlinear frequency response performance of bimorphs by an ARC mechanical stopper and point stopper model could be observed by the numerical simulations of the lumped parameter electromechanical model. PVEH prototypes were manufactured by 3D printing and tested. To verify the high-power generation capacity, PVEH with an ARC stopper has 1.756 times more voltage than that of a PVEH with a point stopper.
Keyword ：
energy harvesting mechanical ARC stopper piezoelectric uniform stress distribution
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Wang, Lu , Wu, Zutang , Liu, Shuai et al. Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting [J]. | ENERGIES , 2022 , 15 (9) . |
| MLA | Wang, Lu et al. "Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting" . | ENERGIES 15 . 9 (2022) . |
| APA | Wang, Lu , Wu, Zutang , Liu, Shuai , Wang, Qian , Sun, Junjie , Zhang, Yun et al. Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting . | ENERGIES , 2022 , 15 (9) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
In the Internet of Things era, wearable electronics and sensors have become essential for health monitoring and human computer interaction. However, a continuous power supply is an urgent demand in the field of distributed sensing. Energy harvesting from daily human activities and its conversion into electricity are expected to replace traditional batteries and wearable power supplying electronic devices. This article reviews the electromagnetic, piezoelectric, and triboelectric energy harvesting technologies from human motions, including joint rotation, limb swing, force application, fold stretching, and organ motion. It also discusses and analyzes the advantages and disadvantages of various recently proposed human energy harvesters. In addition, possible applications of active sensing and wearable powered electronic devices driven by human body kinetic energy harvesting are provided. Finally, the concept of a human energy and information exchange center based on energy harvesting is proposed as a future prospect.
Keyword ：
electromagnetic technology energy harvesting human kinetic energy piezoelectric technology triboelectric technology
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Wang, Lu , Fei, Zhenxuan , Qi, Youchao et al. Overview of Human Kinetic Energy Harvesting and Application [J]. | ACS APPLIED ENERGY MATERIALS , 2022 , 5 (6) : 7091-7114 . |
| MLA | Wang, Lu et al. "Overview of Human Kinetic Energy Harvesting and Application" . | ACS APPLIED ENERGY MATERIALS 5 . 6 (2022) : 7091-7114 . |
| APA | Wang, Lu , Fei, Zhenxuan , Qi, Youchao , Zhang, Chi , Zhao, Libo , Jiang, Zhuangde et al. Overview of Human Kinetic Energy Harvesting and Application . | ACS APPLIED ENERGY MATERIALS , 2022 , 5 (6) , 7091-7114 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
A Mach-Zehnder fiber optic sensor with high refractive index response sensitivity was developed. By fabricating a waist-enlarged bitaper structure on the interference arm of a single mode-multimode-single mode (SMS) Mach-Zehnder interferometer (MZI), the spectral contrast and response sensitivity were improved. Subsequently, the response sensitivity was further improved by etching the interference arm. When a beam of light was introduced into the sensor, due to the structural mismatch between the multimode fiber and the normal transmission light, the difference between the low-order mode and the high-order mode was generated in the fiber core and the fiber cladding. In the process of transmission in the sensing arm, due to the different refractive indices of the core and cladding, the optical path difference of the high-order mode and the low-order mode was different, which eventually generated interference fringes. The experimentally measured response sensitivity of SMS MZI in the range of 1.351 RIU to 1.402 RIU is 57.623 nm/RIU; the response sensitivity of a single mode-multimode-bitaper-multimode-single mode (SMBMS) MZI is 61.607 nm/RIU; and the response sensitivity of the etched SMBMS (ESMBMS) MZI is 287.65 nm/RIU. The response sensitivity of the new ESMBMS MZI is three times higher than that of the original SMS MZI. The sensor has the characteristics of compact structure, high sensitivity, easy manufacture, and a wide range of refractive index measurements, and can be used in food processing, pharmaceutical manufacturing and other fields.
Keyword ：
corrosion fiber optic sensor Mach-Zehnder interferometer optical fiber waist-enlarged bitaper the refractive index sensitivity
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhao, Na , Wang, Zelin , Zhang, Zhongkai et al. High Sensitivity Optical Fiber Mach-Zehnder Refractive Index Sensor Based on Waist-Enlarged Bitaper [J]. | MICROMACHINES , 2022 , 13 (5) . |
| MLA | Zhao, Na et al. "High Sensitivity Optical Fiber Mach-Zehnder Refractive Index Sensor Based on Waist-Enlarged Bitaper" . | MICROMACHINES 13 . 5 (2022) . |
| APA | Zhao, Na , Wang, Zelin , Zhang, Zhongkai , Lin, Qijing , Yao, Kun , Zhang, Fuzheng et al. High Sensitivity Optical Fiber Mach-Zehnder Refractive Index Sensor Based on Waist-Enlarged Bitaper . | MICROMACHINES , 2022 , 13 (5) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
A multichannel passive ferromagnetic particle inductive sensor is proposed, which is mainly composed of a honeycomb permanent magnet and a set of coils. The honeycomb magnet generates the same high gradient static magnetic field in each channel (a total of seven channels, six surrounding, and one center), which helps improve the sensor's throughput while maintain high precision. An induced voltage model that includes most of the structural design parameters is proposed, which provides theoretical support for sensor optimization. The correctness of this model is verified by finite element simulation and experiments. The experimental results show that the detection performance of each channel is almost the same, which is expected to he further improved by setting a reference channel. Moreover, the sensor can detect 70 mu m iron particles in a single channel of diameter 4 mm. The proposed sensor can reduce the influence of magnetic field radial uniformity on the induced signals, improve the detection precision, and achieve high throughput (about a 14-fold increase in throughput compared to our previous work). Its high precision and high throughput favor lots of lube oil detection.
Keyword ：
High precision high throughput honeycomb permanent magnet induced voltage model passive ferromagnetic particle sensor
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yuan, Zheng , Feng, Song , Chen, Shanshan et al. A Ferromagnetic Particle Sensor Based on a Honeycomb Permanent Magnet for High Precision and High Throughput [J]. | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT , 2022 , 71 . |
| MLA | Yuan, Zheng et al. "A Ferromagnetic Particle Sensor Based on a Honeycomb Permanent Magnet for High Precision and High Throughput" . | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT 71 (2022) . |
| APA | Yuan, Zheng , Feng, Song , Chen, Shanshan , Jing, Weixuan , Zhao, Libo , Jiang, Zhuangde . A Ferromagnetic Particle Sensor Based on a Honeycomb Permanent Magnet for High Precision and High Throughput . | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT , 2022 , 71 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
The traditional single degree of freedom linear piezoelectric vibration energy harvester (PVEH), such as the cantilever type, mainly works and resonates in a single direction and at a single frequency. To adapt broadband and bidirectional ambient vibration, this paper designs and compares two PVEHs of L-shaped beam and U-shaped beam through COMSOL simulation and prototype test. FEA modeling is introduced for accurate structure design with modal analysis, voltage frequency response analysis, and proof mass analysis with multiphysics electromechanical coupling simulation. Two PVEH prototypes with different gravity angles and clamping angles are tested at 0.1 g acceleration to find the optimal angle for maximum output power. The best clamping angle of L-PVEH is 135 degrees with RMS power of 0.3 mW at 7.9 Hz, and that of U-PVEH is 45 degrees with RMS power of 0.4 mW at 5.0 Hz. The proposed U-PVEH shows more advantages in low broadband and bidirectional vibration energy harvesting.
Keyword ：
bidirectional energy harvesting L-shaped beam piezoelectric U-shaped beam
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Jiang, Weile , Wang, Lu , Wang, Xinquan et al. Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting [J]. | NANOMATERIALS , 2022 , 12 (21) . |
| MLA | Jiang, Weile et al. "Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting" . | NANOMATERIALS 12 . 21 (2022) . |
| APA | Jiang, Weile , Wang, Lu , Wang, Xinquan , Zhao, Libo , Fang, Xudong , Maeda, Ryutaro . Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting . | NANOMATERIALS , 2022 , 12 (21) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Chemiresistive CO2 sensing is attractive due to low cost and ease of chip-level integration. Our previous studies (Yong Xia, 2021) showed the well-developed ZnO material fabricated by in-situ annealing exhibited good CO2 sensing performance. Here, we have expanded on those studies, including CO2 cyclic tests under both dry air and N-2 background whereby a much higher response to CO2 in N-2 background was observed. Detailed density functional theory calculations were conducted to understand the behavior. The results indicated nitrogen doping is mainly responsible for the observed response. In the presence of pre-adsorbed O-2, N-doped ZnO can no longer interact with CO2, which agrees well with the observation of higher response in N-2 background. Furthermore, density of states analysis showed N sp(2) hybridized orbital and N 2p orbital of the N dopant mixed with sp(2) hybridized orbital of C atom and 2p orbitals of C/O atoms in CO2 to form sigma and pi bonds, respectively. However, they mixed with O 2s/2p orbitals of O atom in O-2 when pre-adsorbed O-2 was present, hindering CO2 interaction with N-doped ZnO, and resulting in limited response in air. The illustrated mechanism does not only further the understanding of metal oxide-based CO2 sensing, but also guide the design of new functional materials for CO2 sensing or capture.
Keyword ：
CO2 sensing DFT calculation In-situ annealing Mechanism study N-doped ZnO
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Xia, Yong , Pan, Aifei , Su, Ya-Qiong et al. In-situ synthesized N-doped ZnO for enhanced CO2 sensing: Experiments and DFT calculations [J]. | SENSORS AND ACTUATORS B-CHEMICAL , 2022 , 357 . |
| MLA | Xia, Yong et al. "In-situ synthesized N-doped ZnO for enhanced CO2 sensing: Experiments and DFT calculations" . | SENSORS AND ACTUATORS B-CHEMICAL 357 (2022) . |
| APA | Xia, Yong , Pan, Aifei , Su, Ya-Qiong , Zhao, Sikai , Li, Zhou , Davey, Adrian K. et al. In-situ synthesized N-doped ZnO for enhanced CO2 sensing: Experiments and DFT calculations . | SENSORS AND ACTUATORS B-CHEMICAL , 2022 , 357 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Smart wearable devices are occupying an increasingly important position in scientific research and people's life fields. As an indispensable component of smart wearable devices, sensors play a crucial role in their sensing and feedback capabilities. In this paper, we investigate the bending gesture sensing for the most dexterous part of human anatomy, the finger. Based on series-connected fiber Bragg gratings (FBGs), recognition of finger bending posture is achieved by MATLAB modeling and the cubic spline interpolation.
Keyword ：
bending gesture sensing cubic spline interpolation FBG smart glove
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Lin, Qijing , Yao, Kun , Zhao, Na et al. Finger Bending Sensing Based on Series-Connected Fiber Bragg Gratings [J]. | MATERIALS , 2022 , 15 (10) . |
| MLA | Lin, Qijing et al. "Finger Bending Sensing Based on Series-Connected Fiber Bragg Gratings" . | MATERIALS 15 . 10 (2022) . |
| APA | Lin, Qijing , Yao, Kun , Zhao, Na , Jiao, Yunjing , Wang, Zelin , Tian, Bian et al. Finger Bending Sensing Based on Series-Connected Fiber Bragg Gratings . | MATERIALS , 2022 , 15 (10) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Herein, a novel conductive poly(N-phenylglycine) (PNPG) polymer was successfully prepared, by in situ electrochemical polymerization method (+0.75 V versus Ag/AgCl) for 10 min, on flexible stainless-steel plate coated with a thin Au film (Au/SS) to serve as a binder-free pseudocapacitive PNPG/Au/SS electrode for energy storage devices. Compared to the electrode without Au coating, PNPG/Au/SS electrode exhibited better electrochemical performance with larger specific capacitance (495 F g-1 at a current density of 2 A g-1), higher rate performance and lower resistance, which are good indications to act as a positive electrode for asymmetric supercapacitor devices. Combined with activated carbon as a negative electrode, an asymmetric supercapacitor device was constructed. It displayed a specific capacitance of 38 F g-1 at a current density of 0.5 A g-1 and an energy density of 5.3 Wh kg-1 at a power density of 250 W kg-1. Experimentally, two asymmetric supercapacitor devices were connected in series to power a home-made windmill continuously for 8 s, revealing the high potential of this novel conductive polymer material for energy storage application. © 2022 Institute of Physics Publishing. All rights reserved.
Keyword ：
Activated carbon Capacitance Electrochemical deposition Electrochemical electrodes Energy storage Plastic coatings Polymerization Reduction Supercapacitor
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Li, Min , Luo, Yunyun , Jia, Chen et al. Au-assisted polymerization of conductive poly(N-phenylglycine) as high-performance positive electrodes for asymmetric supercapacitors [J]. | Nanotechnology , 2022 , 33 (4) . |
| MLA | Li, Min et al. "Au-assisted polymerization of conductive poly(N-phenylglycine) as high-performance positive electrodes for asymmetric supercapacitors" . | Nanotechnology 33 . 4 (2022) . |
| APA | Li, Min , Luo, Yunyun , Jia, Chen , Huang, Mimi , Yu, Mingzhi , Luo, Guoxi et al. Au-assisted polymerization of conductive poly(N-phenylglycine) as high-performance positive electrodes for asymmetric supercapacitors . | Nanotechnology , 2022 , 33 (4) . |
| Export to | NoteExpress RIS BibTex |
Export
| Results： |
Selected to |
| Format： |
